Features:
Cast Iron Self-Priming Centrifugal Commercial Pool Pump
Especially
designed for commercial and public swimming pools and spas, aquatic
facilities, water parks and fountain applications where high
performance and self-priming characteristics are desired. These
self-priming, high performance pumps are available in high head and
medium head models, providing a complete range of performance
characteristics. Motors are open drip-proof, continuous duty rated 3450
RPM.
Extended Information:
Product Specifications
| MEDIUM HEAD - D SERIES |
| DMH-171 |
3 |
1 |
230 |
17 |
12 |
2" |
135 |
| DMH3-171 |
3 |
3 |
230/460 |
10.6/9.6/4.8 |
14 |
2" |
135 |
| DMJ-172 |
5 |
1 |
230 |
28 |
8 |
2-1/2" |
178 |
| DMJ3-172 |
5 |
3 |
230/460 |
16.8/15.2/7.6 |
12/14 |
2-1/2" |
178 |
| HIGH HEAD - D SERIES |
| DHH-169 |
3 |
1 |
230 |
17 |
12 |
1-1/2" |
135 |
| DHH3-169 |
3 |
3 |
230/460 |
10.6/9.6/4.8 |
14 |
1-1/2" |
135 |
| DHJ-170 |
5 |
1 |
230 |
28 |
8 |
2" |
178 |
| DHJ3-170 |
5 |
3 |
230/460 |
16.8/15.2/7.6 |
12/14 |
2" |
178 |
1: Dimensions and Max Load Amps may vary per motor manufacturer
Certifications
Note: ALL PUMP MODELS require external overload protection. 3-phase models, and 5 HP single phase, require a magnetic starter.
Note: Maximum ambient temperature: 104 degrees (40 C)
Note: 200 and 575 volt models available.
Note: Pumps are NSF listed only when installed with hair and lint trap. PUMPS (and performance curves) DO NOT INCLUDE HAIR
AND LINT TRAP.
“L” mounting dimension: .44 Slot = 3/8" Bolt .34 Diameter = 5/16"
| 
