|
Patio Tones
|
 |
|
 |
Makes Your
Patio New Again |
|
Covers Unsightly
Repairs |
|
Non-Slip
Finish |
|
PATIO TONES will greatly enhance the beauty of any concrete
patio or pool deck. Plain or worn concrete gives a dull and
uninteresting appearance, detracting from the ambiance of
the area. PATIO TONES adds life as well as protection.
PATIO TONES is also excellent for the restoration of sprayed
and patterned concrete surfacing systems.
Simply make any necessary repairs, clean the deck according
to label
instructions, and roll on PATIO TONES. The acrylic formula
lets you prepare
and coat in one day. The result will be a surface that is
safe, beautiful
and protected.
Coverage: 90 - 125 square feet per gallon depending on surface
porosity.
Available in five-gallon and one-gallon containers.
Two coats required on initial application.
Available in these attractive colors:
Ivory, Champagne, Cream Peach, Coral, Desert Sun, Sand Valley,
Smoky Blue, and Creekstone.
Application is as Easy as 1 - 2 - 3! in one day!
 |
|
 |
| Before |
|
After |
| |
|
|
| Old
decks will look new again with Patio Tones |
All concrete surfaces should be cleaned according to the
following three
step cleaning process.
Step 1
Scrub area with a solution of No. 910 WASHING COMPOUND (tri-sodium
phosphate) and water to remove any oil film.
Step 2
Scrub the deck with a 10% solution of muriatic acid to remove
mineral
deposits and open pores for penetration of PATIO TONES. Neutralize
any
remaining traces of acid by repeating step one.
Step 3
PATIO TONES can now be applied directly to a wet surface.
However, any
puddles should be dissipated. Roll on PATIO TONES using a
medium nap roller
equipped with an extension handle. Allow first coat to dry
four hours
(average) before second coat is applied. For more information
refer to the
label or request Technical Bulletins No. 107 and No. 141.
PATIO TONES cures overnight. You can enjoy your new surface
the next day!
For heavy traffic, Patio Tones may need a full 24 hour cure. | 
