FREE SHIPPING
Handling May Apply
Details & Exclusions
6 days/week -
view hours
866-752-7665
Home > Pool Products > Pool Paint > Epoxy Base Paint

Sort By:
Page of 1
Kelly Technical Coatings - Olympic Epoxy Primer - Poxoprime II Kelly Technical Coatings - Olympic Epoxy Solvent / Thinner Kelly Technical Coatings - Olympic Fusion Plus Kelly Technical Coatings - Olympic Gunzite
$89.75
$38.99

(1)
$89.50
$81.25
Kelly Technical Coatings - Olympic Epoxy Primer - Poxoprime II Kelly Technical Coatings - Olympic Epoxy Solvent / Thinner Kelly Technical Coatings - Olympic Fusion Plus (1 gallon) Kelly Technical Coatings - Olympic Gunzite
Kelly Technical Coatings - Olympic Zeron - Epoxy (Bikini Blue) Gallon Kelly Technical Coatings - Olympic Zeron - Epoxy (Blue Ice) Kelly Technical Coatings - Olympic Zeron - Epoxy (White) Kelly Technical Coatings Olympic Zeron Epoxy Pool Paint (Blue Mist) Gallon
$103.99
$103.99
$98.99
$103.99
Kelly Technical Coatings - Olympic Zeron - Epoxy (Bikini Blue) Kelly Technical Coatings - Olympic Zeron Kelly Technical Coatings - Olympic Zeron Kelly Technical Coatings Olympic Zeron Epoxy Pool Paint (Blue Mist) Gallon
Ramuc Type EP Epoxy Pool Paint - Gallon
Ramuc Type EP Epoxy Pool Paint - Gallon
   
 
Epoxy Base Paint

Epoxy paint, for new construction, and pools painted previously with epoxy paint. It is long lasting, durable and will stand UV rays, automatic pool cleaners and chemical treatments. Epoxy paint will last about 7-10 years.







  • Q How long do your products last?
    A ZERON, 6-8 years; OPTILON, 2-3 years; HYDROLON, 1-2 years; PATIO TONES 3-4 years.
  • Q How do I tell what type of paint is on my pool?
    A Send a sample to Kelley Technical Coatings, Inc. If no samples are available, follow instructions under the Previously Coated Pools tab on the Selecting Your Coating page.
  • Q Can you apply ZERON over OPTILON or PARALON 2?
    A ZERON is not chemically compatible with OPTILON or PARALON 2 unless our conversion coating FUSION PLUS is applied first.
  • Q What if my customer complains of two shades of the same color?
    A Sometimes slight color variances occur between different batches. Kelley Technical Coatings stamps a six digit “batch number” on each box and can. Be sure your customer leaves with same batch number for any product. If not possible, have them “mix” the two batches in a large container prior to application.
  • Q What happens if it rains after my customer coats their pool?
    A Once the product has completely “set up”, rain will not affect the coating. However, no standing water should be allowed to stand, i.e. main drain, this water should be pumped out or otherwise removed to prevent blistering and fading.
  • Q Can I apply your product over another paint?
    A As a general rule, you need to use the same type coating that is on your pool. (i.e. epoxy over epoxy, rubber base over rubber base, acrylic over acrylic.)
  • Q Is primer required on recoats of ZERON?
    A POXOPRIME II, or GUNZITE PRIMER, are required on a bare surface only. On recoats of ZERON, a primer is not necessary. If spot priming is required, use GUNZITE PRIMER. POXOPRIME II should only be used on never before coated smooth plaster and concrete.
  • Q What are the primary reasons for unsatisfactory product performance?
    A Improper surface preparation is the number one cause of blistering and other performance issues. Unacceptable application conditions such as heat or cold can also contribute, and always follow the proper curing schedule prior to filling the pool.
  • Q What is your warranty?
    A We manufacture our products with the highest quality materials, however, we do not offer a general product warranty because of factors which we cannot control (i.e. weather, workmanship, etc.)
  • Q Are epoxy catalysts interchangeable?
    A NO. Mixing wrong catalyst with wrong base will cause product failure.
  • Q What system is recommended for fiberglass, hot tubs or spas?
    A Only the GUNZITE PRIMER and ZERON system are recommended for these surfaces.
  • Figuring Pool Surface Area
    The amount of coating you will need for your pool is closely related to the smoothness of the pool surface. You will also need to know the total square feet of your pool interior.

    How to figure the square feet in your pool

    Find the form represented below that most closely resembles the shape of your swimming pool. The formula underneath will give you the approximate square feet of surface in the pool's interior. Check the coverage of the product you select to determine how many gallons you will need.



    RECTANGULAR
    Length x Width x 1.6 equals total square feet
    LAZY L
    Length x Width x 1.65 equals total square feet
    FREE FORM
    Length x Width x 1.6 equals total square feet
    OVAL
    Length x Width x 1.65 equals total square feet
    ROMAN
    Length x Width x 1.55 equals total square feet